一、概述：欧莱斯氧化铝丝印移印油墨是一种用高档进口丙烯酸树脂和高级颜料经过细制研磨加工组合而成，具有光泽优、附着力佳、耐冲击、耐汽油、酒精、耐折叠等特点。添加专用硬化剂可增加附着力,提高硬度。
二、性能：适合于40T~165T（100目~420目）网版印刷，以120T聚酯单丝、感光胶网版计算涂覆盖面积每公斤达35~40㎡
三、溶剂：用783慢干水；
四、安全标准：符合欧美玩具十大金属EN.71检测标准。
五、适用范围：铁、铝、合金片材；玻璃、塑料电镀件、PP、ABS塑胶型制品的丝印或喷涂。
六、产品特点：
1、 对铁、铝、合金、玻璃制品有良好的连接力；
2、 平光、手感好，流平性佳、面光洁；
3、 表面硬度好，耐冲击性能强、抗刮伤、耐折叠；
4、 耐汽油、耐酒精程度佳；
七、使用方法：
1、 使用添加稀释剂充分搅拌均匀；
2、 多色套印时，需表干后才能进行下一颜色印刷；
八、注意事项：
由于现在五金材质繁多，使用本厂油墨时应先测试OK方能印刷。
I. overview:
Olas alumina silk screen printing ink is a with high-grade import acrylic resin and senior pigment after fine grinding system combination, with excellent gloss and good adhesion, impact resistance, gasoline resistance, alcohol resistance, folding, and other characteristics. Adding special hardening agent can increase the adhesion, improve the hardness.
Second, performance: for in 40T~165T (100 mesh 420 head) screen printing, to 120t polyester monofilament, photosensitive adhesive screen with coverage area calculation per kilogram of 35-40 square meters
Three, 783: solvent retarder;
Four, safety standards: in line with European and American toys ten metal EN.71 detection standards.
Five, the scope of application: iron, aluminum, alloy sheet; glass, plastic plating parts, ABS, PP plastic products, silk screen or spray.
Six, product features:
1, iron, aluminum, alloy, glass products have good connectivity;
2, Matt, feel good, good leveling, surface finish;
3, the surface hardness, impact resistance, anti scratch, folding;
4, gasoline, alcohol resistance is good;
Seven, using method:
1. Use the addition of diluent to stir well.;
2, multicolor overprint, need to dry before the next color printing;
Eight, note:
Due to the wide range of hardware, using this factory ink should be tested before OK can print.
