英国GRIMM格林进口液氨泵 UK GRIMM imported liquid ammonia pump
英国GRIMM格林进口液氨泵概述：
进口液氨泵是英国格林在对同类产品分析研究基础上，Z新开发出来的产品，主要用于输送液氨、氨水、甲醇、二甲铵、环氧丙烷、粗苯、环氧乙烷、氯甲烷、异丁烯、丁二烯等性质类似的挥发性液体，广泛应用于燃气、石油、化工、制药、冶金等领域，该泵密封圈和滑片均采用国外特殊配方，耐磨蚀性、韧性、强度非常高，泵壳的材料是高密度耐磨蚀的合金铸铁，加工后光洁度高，从而保证了氨液的不泄露，泵的特点就是密封性好，压力高且稳定。
英国GRIMM格林进口液氨泵工作原理：
进口液氨泵型式为容积式叶片泵，工作靠叶片离心滑动，流量与轴的转速有关，定子内曲面采用国内独创的复合曲线制成，定子与转子、挡板、叶片组成十个密封腔体，由于定子曲面是复合曲线，当转子转动时.进口腔体容积逐渐增大，并形成负压产生吸力，从而将氨液吸入。当转子旋转一定角度后，容积截而逐渐减小，从而将氨液压出，在吸油腔与压油腔之间有一封油块把油腔与压油腔隔开。叶片靠离心力和两挡板结构从而与定子内曲而紧密贴合，使泵在额定状态下正常工作。
英国GRIMM格林进口液氨泵技术参数：
流 量：2-80m3/h
功 率：1.5-18.5kw
转 速：600r/min、780r/min
口 径：25-100mm
压 差：0.5MPa
温度范围：-40℃～40℃
工作压力：2.0Mpa
材 质：铸铁、不锈钢
英国GRIMM格林进口液氨泵应用领域：
主要用于输送液氨、氨水、甲醇、二甲铵、环氧丙烷、粗苯、环氧乙烷、氯甲烷、异丁烯、丁二烯等性质类似的挥发性液体，广泛应用于燃气、石油、化工、制药、冶金等领域。
UK GRIMM imported liquid ammonia pump summary:
imported liquid ammonia pump is the latest product developed by Green, UK based on the analysis and research of similar products. It is mainly used to transport liquid ammonia, ammonia, methanol, two methylamine, epoxy propane, Crude Benzol, ethylene oxide, chloromethane, isobutene, butadiene and so on. It is widely used in gas and oil. In the fields of chemical, pharmaceutical, metallurgy and other fields, the seal ring and slider of the pump all use special foreign formula, the abrasion resistance, toughness and strength are very high. The material of the pump shell is high density and wear-resistant alloy cast iron. After processing, the finish of the pump is high, so that the liquid of ammonia is not leaked. The pump is characterized by good sealing, high pressure and stable pressure. Sure.
UK GRIMM imported liquid ammonia pump working principle:
The type of imported liquid ammonia pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade. Because the stator surface is a compound curve, when the rotor rotates, the volume of the mouth body is driven by the volume. Gradually increase, and form negative pressure to generate suction, so as to inhale ammonia solution. When the rotor rotates a certain angle, the volume is cut down gradually, and the ammonia liquid is pressed out. There is an oil block between the oil suction chamber and the pressure chamber to separate the oil cavity from the pressure chamber. The blade is tightly connected to the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM imported liquid ammonia pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 2.0Mpa
Material: cast iron and stainless steel
UK GRIMM imported liquid ammonia pump application area:
It is mainly used to transport liquid ammonia, ammonia, methanol, two methylamine, epoxy propane, crude benzene, ethylene oxide, chloromethane, isobutene, butadiene and so on. It is widely used in gas, petroleum, chemical, pharmaceutical, metallurgy and other fields.
