JYD-g系列高粘度油滤油机,齿轮油精细滤油机,便携式滤油车

 
 
单价 7500.00 / 台对比
销量 暂无
发货 天津西青区预售,付款后7天内
库存 500台起订1台
品牌 净宇
过滤精度 1-10um
过滤等级 二级
温度范围 20-80
过期 长期有效
更新 2018-04-26 14:56
 
联系方式
加关注0

天津净宇机械设备有限公司

企业会员第14年
资料未认证
保证金未缴纳
  • 天津-西青区
  • 上次登录 2018-08-25
  • tjjingyu@126.com
  • 86-022-23677994
  • 荆春梅 (先生)   销售经理
详细说明

JYD-40G双桶四级高粘度滤油车

用途:                                                                    

适用于设备保养、润滑油、稀油、液压油、机油、齿轮油、变速箱油、油压油、乳化液、皂化油、水-乙二醇、磷酸酯、齿轮油、变压器油、透平油、机械油、煤油、油漆的加注、过滤、输送、抽吸、旁路循环过滤。

特点:

该机采用四级过滤、轻巧灵活、操作简单、无污染。本机可有效过滤,能精细过滤油中有害机械物质,是电力、石化、冶金机械、铁路等行业对用油量不大的互感器、机床、油开关等设备进行加油、抽油。本机是对油液高精度除杂的首选设备,特别适合电力部门远距离、高扬程加油、抽油使用。

1、滤油机在启动时,应注意不能使油泵反转,以免引起油泵轴封吹出导致吸入空气。
Avoiding the possible counter rotation of the oil pump while starting the machine, otherwise it may lead to the out blown of the axle seal and entering of air.

2、滤油机在使用过程中,油泵可能吸入空气,影响油泵流量,为了达到滤油机的额定流量以及保证精细滤芯的正常工作,应及时打开排气阀,以便将滤筒中的空气排净(即排气阀出油后),排完空气之后及时关闭排气阀。
Air might be introduced into the machine during the operation and affect the oil flow. To ensure the rated flow and normal operation of the fine filter element, the discharge valve should be opened in time to release the air until oil can be seen at the outlet of the discharge valve, then close the discharge valve closed.

3、滤油机使用一段时间后,如因污染物严重堵塞粗过滤滤芯表面而使吸油不畅,引起油泵噪声过大,应停机取出滤芯清洗。
After a certain period of predation, coarse cleaner could be gradually contaminated and noise of pump might occur, you should stop the machine in order to clean the filter element.

4、精细滤芯在使用一段时间后,易被污染物逐渐堵塞,引起滤筒压力升高,当压力达到0.4MPa时,需及时更换精细滤芯。

Dirt might stick to the elements of fine filter, causing a rise of the pressure in the filter bowl. When the pressure hits 0.4Mpa, the elements should be the changed in time.

5、使用的吸油、出油软管应随时保持清洁。

The suction and oil outlet tube should always be kept clean.

6、如果滤油机抽不出油,请检查认定:

Should the pushcart filter fail to pump oil, please check;

a、油泵转向是否正确;

The rotating direction of the pump;

b、油箱至吸油口间的各零部件密封是否可靠,吸油口是否离开油面或油液已吸完;

whether the sailings between the tank and oil inlet are properly; the oil inlet is above the oil surface or oil runs out;

c、粗滤器滤芯是否堵塞。

If the elements of rough filter are stuck.

7、滤油机流量显著减少,请检查认定:

If the oil filter distinctly reduced, please check;

a、粗、精过滤滤芯是否堵塞严重;

whether the elements of rough and fine filters are stuck with filth.

b、油泵轴油封是否磨损或反转而造成吹出。

whether an out blown of the axle seal has occurred due to wear or counter rotation.

8、过滤压力突然下降,请检查精细滤芯是否被击穿。

If a sudden pressure drop occurs, please check whether the elements of fine filter have been damaged.

 

 

举报收藏 0
更多>本企业其它产品
JYD-d八级过滤脱水精密滤油机,脱水滤油机,八级脱水过滤机 JYD-j系列加热型滤油机 天津滤油机厂家供应精细加油小车,电动净油小车 天津滤油机厂家专营移动式过滤机,化工厂过滤机 天津滤油机厂家专营移动式过滤机,化工厂过滤机 液压油滤油小车,液压油专用滤油小车,润滑油滤油小车, 电容油滤油小车,绝缘油滤油小车,燃油滤油小车,液压油净油小车
网站首页  |  隐私政策  |  关于我们  |  诚招代理  |  联系方式  |  服务条款  |  隐私政策  |  著作权与商标声明  |  会员服务  |  汇款方式  |  网站地图  |  网站留言  |  违规举报  |  浙ICP备2022009825号-2  |  浙公网安备33010502011792号